GB 19239-2013 Translated English of Chinese Standard. GB19239-2013: Mounting requirements of special equipment for gas vehiclehttps://www.chinesestandard.net, 13.6.2016 - 12 sivua This Standard specifies mounting requirements, mounting method and inspection method of special equipment for gas vehicle. This Standard applies to compressed natural gas single-fuel, gasoline/CNG duel-fuel vehicles of which the rated working pressure is not greater than 20 MPa, and liquefied petroleum gas single-fuel, gasoline/LPG duel-fuel vehicles of which the rated working pressure is not greater than 2.2 MPa. Vehicles of other related types of gas can reference to this Standard for implementation. |
Yleiset termit ja lausekkeet
actual mounting mode applies Automotive bellows and ventilation CNG system leakage compressed natural gas compressed natural vehicles cylinder accessories data of force detection draw force-displacement dual-fuel duel-fuel vehicles easy to observe edition equipment for gas evaporation pressure regulator Fill with rated filling receptacle firmly mounted fixed on vehicle fixing clip foaming liquid Fuel-change switch Gas cylinder mounting gas hereinafter referred gas vehicles QC/T GB/T High-pressure pipe fittings liquefied petroleum gas LPG system method stipulated mounted in cab mounted in exposed mounted in position mounting method mounting strength test Natural gas vehicle petroleum gas vehicles Pipeline pressure gauge protective device provisions of QC/T rated working pressure regulator and evaporation requirements of special revision of ECE Rigid high-pressure pipes seal-boxes Spacing between fixing special component special equipment specified mounting requirement stipulated in 5.1.3 system leakage test take effective protective Test apparatus Test methods test specimen vehicle and liquefied vehicles shall undertake ventilation interfaces