QC/T 1067.3-2017 Translated English of Chinese Standard. (QCT 1067.3-2017, QC/T1067.3-2017, QCT1067.3-2017): Connector used in automobile wire harness and electrical device - Part 3: Type, dimension and special requirement of the ring terminalhttps://www.chinesestandard.net, 2.11.2019 - 18 sivua This standard specifies the type, size and special requirements of automotive wire connectors. This standard applies to low-voltage wire connectors, ignition wire connectors, battery wire connectors in automotive wiring harnesses and electrical equipment. |
Yleiset termit ja lausekkeet
2017 Automotive connectors 42 automotive industry Applicable cross-section Automobile products drawing Automobile Wiring Harness automobiles QC/T automotive industry standards battery terminal holes battery wire connectors Bench test methods Communication industry standards connector Table connectors for automobiles copper alloy copper and copper cross-section of conductor D2 Outer diameter dates of implementation DELETE the 3.2 design documents Dimensions and specific drawing and design electric vehicles electrical equipment Electronic Industry Standardization flammable liquid dangerous follow the requirements fork connector fuel tank vehicle GB/T harnesses and electrical ignition wire connectors implementation of 42 Industry and Information Industry Press Information Technology Light industry standards low-voltage wire connectors mechanical industry standards Metallurgical industry standards Ministry of Industry original QCn Performance requirements Road transport lightweight round connector shown in Figure Special requirements Standard reference standards were published supplier Symbol of polarity Technical requirements Technical specifications type A connector type and size type B connector Types and sizes