« EdellinenJatka »
9 10 11 12 12 12 13 13
13 14 15 16 16
Crew accommodations_. Gross tonnage
Deductions for other purposes. Deck houses, breaks, etc..
Deductions for propelling power. Hatchways
Register tonnage Between decks.
Appendix of measurement Open vessels.
Vessels exempt from measurementWater ballast_
Measurement of foreign vessels Net tonnage
Exemption from measurement.----Measurement.
Before any vessel shall be registered, she shall be measured by a surveyor, if there be one, or by the person he shall appoint, at the port or place where the vessel may be, and if there be none, by such person as the collector of the district within which she may be shall appoint. But in all cases where a vessel has before been registered as a vessel of the United States, it shall not be necessary to measure her anew, for the purpose of obtaining another register; unless such vessel has undergone some alteration as to her burden, subsequent to the time of her former registry. (R. S. 4148.)
The officer or person by whom such measurement is made shall, for the information of and as a voucher to the officer by whom the registry is to be made, grant a certificate, specifying the build of the vessel, her number of decks and masts, her length, breadth, depth, the number of tons she measures, and such other particulars as are usually descriptive of the identity of a vessel, and that her name, and the place to which she belongs, are painted on her stern in manner required by this Title [R. S. 4131-4305); which certificate shall be countersigned by an owner, or by the master of such vessel, or by some other person who shall attend her admeasurement, on behalf of her owner or owners, in testimony of the truth of the particulars therein contained; without which the certificate shall not be valid. (R. S. 4149.).
The registry of every vessel shall express her length and breadth, together with her depth and the height under the third or spar deck, which shall be ascertained in the following manner: The tonnage deck, in vessels having three or more decks to the hull, shall be the second deck from below; in all other cases the upper deck of the hull is to be the tonnage-deck. The length from the fore part of the outer planking on the side of the stem to the after part of the main stern-post of screw-steamers, and to the after part of the rudderpost of all other vessels measured on the top of the tonnage-deck, shall be accounted the vessel's length. The breadth of the broadest part on the outside of the vessel shall be accounted the vessel's breadth of beam. A measure from the under side of the tonnagedeck plank, amidships, to the ceiling of the hold, (average thickness,) shall be accounted the depth of hold. If the vessel has a third deck, then the height from the top of the tonnage-deck plank to the under side of the upper-deck plank shall be accounted as the height under the spar-deck. All measurement to be taken in feet and fractions of feet; and all fractions of feet shall be expressed in decimals. (R. S. 4150.)
No part of any vessel shall be required by the preceding section to be measured or registered for tonnage that is used for cabins or state-rooms, and constructed entirely above the first deck, which is not a deck to the hull. (R. S. 4151.)
a Gross Tonnage.
The register tonnage of every vessel built within the United States or owned by citizen or citizens thereof shall be her entire internal cubical capacity in tons of one hundred cubic feet each, to be ascertained as follows: Measure the length of the vessel in a straight line along the upper side of the tonnage-deck, from the inside of the inner plank, average thickness, at the side of the stem to the inside of the plank on the stern-timbers, average thickness, deducting from this length what is due to the rake of the bow in the thickness of the deck, and what is due to the rake of the stern-timber in the thickness of the deck, and also what is due to the rake of the sterntimber in one-third of the round of the beam; divide the length so taken into the number of equal parts required by the following table, according to the class in such table to which the vessel belongs:
Class one. Vessels of which the tonnage length according to the above measurement is fifty feet or under: into six equal parts.
Class two. Vessels of which the tonnage length according to the above measure is above fifty feet and not exceeding one hundred feet: into eight equal parts.
Class three. Vessels of which the tonnage length according to the above measurement is above one hundred feet, and not exceeding one hundred and fifty feet: into ten equal parts.
Class four. Vessels of which the tonnage length according to the above measurement is above one hundred and fifty feet, and not exceeding two hundred feet: into twelve equal parts.
Class five. Vessels of which the tonnage length according to the above measurement is above two hundred feet, and not exceeding two hundred and fifty feet: into fourteen equal parts.
Class six. Vessels of which the tonnage length according to the above measurement is above two hundred and fifty feet: into sixteen equal parts.
Then, the hold being sufficiently cleared to admit of the required depths and breadths being properly taken, find the transverse area of such vessel at each point of division of the length as follows:
Measure the depth at each point of division from a point at a distance of one-third of the round of the beam below such deck; or, in case of a break, below a line stretched in continuation thereof, to the upper side of the floor-timber, at the inside of the limber-strake, after deducting the average thickness of the ceiling, which is between the bilge-planks and limber-strake; then, if the depth at the midship division of the length do not exceed sixteen feet, divide each depth into four equal parts; then measure the inside horizontal breadth, at each of the three points of division, and also at the upper and lower points of the depth, extending each measurement to the average thickness, of that part of the ceiling which is between the points of measurement; number these breadths from above, numbering the upper breadth one, and so on down to the lowest breadth; multiply the second and fourth by four, and the third by two; add these products together, and to the sum add the first breadth and the last, or fifth; multiply the quantity thus obtained by one-third of the common interval between the breadths, and the product shall be deemed the transverse area; but if the midship depth exceed sixteen feet, divide each depth into six equal parts, instead of four, and measure as before directed, the horizontal breadths at the five points of division, and also at the upper and lower points of the depth; number them from above as before; multiply the second, fourth, and sixth by four, and the third and fifth by two; add these products together, and to the sum add the first breadth and the last, or seventh; multiply the quantities thus obtained by one-third of the common interval between the breadths, and the product shall be deemed the transverse area.
Having thus ascertained the transverse area at each point of division of the length of the vessel, as required above, proceed to escertain the register tonnage of the vessel in the following manner:
Number the areas successively one, two, three, and so forth, number one being at the extreme limit of the length at the bow, and the last number at the extreme limit of the length at the stern; then, whether the length be divided according to the table into six or sixteen parts, as in classes one and six, or any intermediate number, as in classes two, three, four, and five, multiply the second, and every even-numbered area by four, and the third, and every odd-numbered area, except the first and last, by two; add these products together, and to the sum add the first and last if they yield anything; multiply the quantities thus obtained by one-third of the common interval between the areas, and the product will be the cubical contents of the space under the tonnage-deck; divide this product by one hundred, and the quotient, being the tonnage under the tonnage-deck, shall be deemed to be the register tonnage of the vessel subject to the additions hereinafter mentioned. (R. S. 4153.) Deck Houses, Breaks, etc.
If there be a break, a poop, or any other permanent closed-in space on the upper deck, available for cargo, or stores, or for the berthing or accommodation of passengers or crew, the tonnage of that space shall be ascertained as follows and added to the gross tonnage:
Measure the internal mean length of such space in feet, and divide it into an even number of equal parts of which the distance asunder shall be most nearly equal to those into which the length of the tonnage-deck has been divided; measure at the middle of its height the inside breadths; namely, one at each end and at each of the points of division, numbering them successively one, two, three, and so forth; then to the sum of the end breadths add four times the sum of the even-numbered breadths and twice the sum of the odd-numbered breadths, except the first and last, and multiply the whole sum by
one-third of the common interval between the breadths; the product will give the mean horizontal area of such space; then measure the mean height between the planks of the decks, and multiply by it the mean horizontal area; divide the product by one hundred, and the quotient shall be deemed to be the tonnage of such space, and shall be added to the tonnage under the tonnage-decks, ascertained as aforesaid: Provided, That nothing shall be added to the gross tonnage for any sheltered space above the upper deck which is under cover and open to the weather; that is, not inclosed. (R. S. 4153; Mar. 2, 1895, sec. 1 (h).) Hatchways.
The cubical contents of the hatchways shall be obtained by multiplying the length and breadth together and the product by the mean depth taken from the top of beam to the under side of the hatch. From the aggregate tonnage of the hatchways there shall be deducted one-half of one per cent of the gross tonnage and the remainder only shall be added to the gross tonnage of the ship exclusive of the tonnage of the hatchways. (Feb. 6, 1909.) Between Decks.
If a vessel has a third deck, or spar deck, the tonnage of the space between it and the tonnage-deck shall be ascertained as follows:
Measure in feet the inside length of the space, at the middle of its height, from the plank at the side of the stem to the plank on the timbers at the stern, and divide the length into the same number of equal parts into which the length of the tonnage-deck is divided; measure, also at the middle of its height, the inside breadth of the space at each of the points of division, also the breadth of the stem and the breadth at the stern; number them successively one, two, three, and so forth, commencing at the stem; multiply the second, and all other even-numbered breadths, by four, and the third, and all the other odd-numbered breadths, except the first and last, by two; to the sum of these products add the first and last breadths, multiply the whole sum by one-third of the common interval between the breadths, and the result will give, in superficial feet, the mean horizontal area of such space; measure the mean height between the plank of the two decks, and multiply by it the mean horizontal area, and the product will be the cubical contents of the space; divide this product by one hundred, and the quotient shall be deemed to be the tonnage of such space, and shall be added to the other tonnage of the vessel ascertained as above directed. And if the vessel has more than three decks, the tonnage of each space between decks, above the tonnage-deck, shall be severally ascertained in the manner above described, and shall be added to the tonnage of the vessel, ascertained as above directed. (R. S. 4153.) Open Vessels.
In ascertaining the tonnage of open vessels the upper edge of the upper strake is to form the boundary-line of measurement, and the depth shall be taken from an athwartship line, extending from the upper edge of such strake at each division of the length. (R. S.
In the case of a ship constructed with a double bottom for water ballast, if the space between the inner and outer plating thereof is certified by the collector to be not available for the carriage of cargo, stores, or fuel, then the depth of the vessel shall be taken to be the upper side of the inner plating of the double bottom, and that upper side shall for the purposes of measurement be deemed to represent the floor timber. From the gross tonnage there shall be deducted any other space adapted only for water ballast certified by the collector not to be available for the carriage of cargo, stores, supplies, or fuel. (Mar. 2, 1895; Feb. 6, 1909, sec. 2.) Net Tonnage.
From the gross tonnage of every vessel of the United States there shall be deducted Crew Accommodations.
(a) The tonnage of the spaces or compartments occupied by or appropriated to the use of the crew of the vessel. Every place appropriated to the crew of the vessel shall have a space of not less than seventy-two cubic feet and not less than twelve superficial feet, measured on the deck or floor of that place, for each seaman or apprentice lodged therein. The provisions of this Act requiring a crew space of seventy-two cubic feet per man shall apply only to vessels the construction of which shall be begun after June thirtieth, eighteen hundred and ninety-five. Such place shall be securely constructed, properly lighted, drained, and ventilated, properly protected from weather and sea, and as far as practicable properly shut off and protected from the effluvium of cargo or bilge water; and failure to comply with this provision shall subject the owner to a penalty of five hundred dollars. Every place so occupied shall be kept free from goods or stores of any kind not being the personal property of the crew in use during the voyage; and if any such place is not so kept free the master shall forfeit and pay to each seaman or apprentice lodged in that place the sum of fifty cents a day for each day during which any goods or stores as aforesaid are kept or stored in the place after complaint has been made to him by any two or more of the seamen so lodged. No deduction from tonnage as aforesaid shall be made unless there is permanently cut in a beam and over the doorway of every such place the number of men it is allowed to accommodate with these words," certified to accommodate
seamen.” (Aug. 5, 1882; Mar. 2, 1895.)
On als merchant vessels of the United States the construction of which shall be begun after the passage of this Act, except yachts, pilot boats, or vessels of less than one hundred tons register, every place appropriated to the crew of the vessel shall have a space of not less than one hundred and twenty cubic feet and not less than sixteen square feet, measured on the floor or deck of that place, for each seaman or apprentice lodged therein, and each seaman shall have a separate berth and not more than one berth shall be placed one above another; such place or lodging shall be securely constructed, properly lighted, drained, heated, and ventilated, properly protected from weather and sea, and, as far as practicable, properly shut off and