Also“FAROLA,”Anti-corrosive Compositions for Ships' Holds, Emigrant Fittings, Boot-tops, &c., &c.

JOHN SPENCER & SONS, LIMITED. .

NEWBURN STEEL WORKS, NEWCASTLE-ON-TYNE. LONDON OFFICE:-32, YICTORIA STREET, S.W.

ON ADMIRALTY LIST.

MANUFACTURERS OF STEEL

BY THE SIEMENS, CEMENTATION AND CRUCIBLE PROCESSES. SHIP AND BOILER PLATES UP TO 12 FEET WIDE.

INGOTS, SLABS, BLOOMS, BILLETS, and BARS of all Sizes. RIVET STEEL. SPECIAL MILD STEEL FOR BOILER FLUES. STEEL FORGINGS, STEEL CASTINGS,

Of all descriptions, to any weight, Rough or Machined. CRANK AXLES & SHAFTING HYDRAULIC PRESSED SPRINGS.-Laminated, Volute, Patent Improved Volute, Conical, Spra

(Original Manufacturers of Volute Springs). BUFFERS, of Wrought and Cast Iron, of all descriptions. Best Cast Steel for Tools from finest Dannemora Brands. Best Cast Steel Files.

IRON FORGINGS OF ALL KINDS. FOSTER'S & FOWNE'S PATENT CRANK SHAFTS

WASTENEYS SMITH'S PATENT STOCKLESS ANCHORS,

937 8 1,037 8

BOMBAY PORT TRUST.

MEREWETHER DRY DOCK.
Extreme Length Available, 557 ft. 10 in.; Width of Entrance, 65 ft. 6 in.

Depth of Water on Block at Entrance, H.W.O.S.T., 26 ft. 2in.
N.B.- Vessels lying in Prince's or Victoria Wet Docks may enter Merewether Dry Dock

direct without having to go into the stream.

RATES: The charge for the first 24 hours will be according to a scale which varies with every 50 tons, the tonnage being the gross registered tonnage of the vessel, or, when more than one are docked at the same time, the aggregate gross tonnage of the vessels. The minimum charge for a vessel is 400 Rs.

Rs. A. P. For a vessel of 3,000 tons the charge is...

4,000
5,000

1,137 80 For every succeeding 24 hours, or part thereof 200 Rs. For longer periods than 72 hours special arrangements will have to be made, subject to the dock not being required for other vessels.

For docking or undocking by night, or on a Sunday or other general holiday, an extra charge will be made.

The above charges include all expenses in connection with docking from the time the vessel reaches the dry dock entrance ; all pumping, shering, and undocking, also the use of blocks, shores, stages, stage ropes and poles.

No commission or fee is levied on stores or materials brought into the dock for cleaning, painting or repairing vessels.

The Trustees do not undertake the work of cleaning, painting and repairing vessels themselves, but they issue licences to approved persons to carry on such work in the dock, and the large Engineering firms in Bombay are competent to execute almost any repairs that may be required to hull or machinery,

By order, H. E. HART, Secretary.

BARRY GRAVING DOCK

& ENGINEERING Co., Ltd. CRAVING DOCKS, 775ft. & 625ft. long.

The Largest Dry Docks in Wales.

LARGE WORKSHOPS, FORGE, & FOUN.

DRY built alongside the Docks, and completely

fitted with the most modern machinery. STEAM TRAVELLING CRANES on the Dock

Sides, lifting up to 15 Tons.

Telegrams : “BARDOCK, BARRY."

National Telephone, No. 1 Post Office Telephone No. 7.

WM. SIMONS & CO., LP

Engineers, Shipbuilders,

And CONSTUCTORS of
IMPROVED DREDGE PLANT,

RENFREW, Scotland,

Established

1810.

Constructors to the following Governments :
BRITISH,

INDIAN,
CANADIAN,

ITALIAN,
CHINESE,

NEW ZEALAND,
DUTCH,

QUEENSLAND,
DUTCH COLONIAL, VICTORIAN,

SOUTH AUSTRALIAN.

ALSO

CROWN AGENTS FOR THE COLONIES,

THWAITES BROS.

LTD., BRADFORD. Contractors to the Admiralty.

MAKERS OF
CENTRIFUGAL
PUMPS AND FANS

AND OF THE
NEW PATENT

‘Bradford Feed-Pump.

HAVING NO SHUTTLE VALVE.