1930 tinued COMPARISON OF TARIFF ACTS OF 1913, 1922, AND 1930 Schedule 2.-Earths, Earthenware, and Glassware-Continued 33 30 per cent. 234(b) 234(c) Hewn, dressed, pointed, pitched, 60 per cent... lined, or polished, or otherwise manufactured. 50 per cent Unmanufactured, or not dressed, 25 cents per cu. ft. 15 cents per cu. pointed, pitched, lined, hewn, lava, and all other stone suit- 235 Slate, slates, slate chimney pieces,] 25 per cent.1 3 cents per cu. ft.1 236 Watch crystals or watch glasses,) 60 per cent. cents per sup. ft. ents per sup. ft." ents persup.ft." per cent. 1"Pointed, pitched, lined" not in acts of 1913 and 1922. "Limestone, building or monumental, unmanufactured, n. s. p. f." "Slate"-new in act of 1930-Free as "minerals, crude, n. s. p. f." under acts of 1913 and 1922. Watch crystals, unfinished, dutiable as manufactures of glass, n. s. p. f. Watch glasses used in automobile headlights, dials, clock faces, etc., subject to duty at rates provided for cylinder, crown, and sheet glass, with additional duty, if bent. Parts of watches, n. s. p. f." SCHEDULE 3.-METALS AND MANUFACTURE (12 Fr ? Provided, That spiegeleisen for the purposes of this Act shall be an iron manganese allo than 30 per cent of manganese. (Acts of 1930 and 1922.) 10 Provided further, That nothing shall be deemed scrap iron or scrap steel except seco or refuse iron or steel fit only to be remanufactured. (Acts of 1913, 1922, and 1930.) 11 Classified and dutiable as iron or steel scrap when valued at not more than 7 cents valued at more than 7 cents per pound, classified and dutiable as waste n. s. p. f., at 10 per 12 No corresponding provision. No additional duty. 13 Duty on the metallic content of the metal named. 14 Containing in excess of 10 per cent manganese; includes ferruginous manganese ore an iron ore. (Act of 1930.) 15 Containing in excess of 30 per cent manganese; ore containing in excess of 10 per cent bu 30 per cent manganese, free. (Act of 1922.) COMPARISON OF TARIFF ACTS OF 1913, 1922, AND 1930 Schedule 3.-Metals and Manufactures of—Continued Classification 302 (1) Ferrosilicon containing: 8 per cent or more and less than 35 cent, 21 ent, 22 ent." ent,23,25 ent," ent,26 taining less ,wholly or ed at more 922.) This id or waste und; when (j) 80 per cent or more and less than 2 cents per lb.13. 60 per cent or more and less than 3 cents per lb.13_ 8 cents per lb.13. 90 per cent or more of silicon.. Silicon metal. Silicon aluminum, aluminum sili con. Columbium or niobium,33 thorium, Alloys of barium and calcium, and (0) All alloys used in the manufacture 21⁄2 cents per lb.28_ 25 per cent. 25 per cent. 25 per cent. 25 per cent. 25 per cent. 25 per cent. Ductile nonferrous alloys of tanta- nganiferous more than as contain 13 Duty on the metallic content of the metal named. 20 Carbon content not specified in Act of 1913. 21 Metals unwrought, n. s. p. f. (Act of 1913.) "Alloys used in the manufacture of steel, n. s. p. f. 27 Alloys, of which aluminum is the component material of chief value, in crude form. 28 On the chromium contained therein. 29 Crude artificial abrasives. 30 Composition metal of which copper is the component material of chief value, n. s. p. f. 31 Chemical elements. "Unmanufactured articles not enumerated or provided for. 33 For ductile metal, see par. 302 (r). 34 Metals unwrought, n. s. p. f. (Act of 1922.) 35 If in chief value of barium or calcium. 36 If in chief value of aluminum, copper, or nickel, were classified according to component of chief value. 37 "Or iron," added in act of 1930. 36 Paragraph, act of 1930 COMPARISON OF TARIFF ACTS OF 1913, 1922, AND 19 39 See par. 305 additional duties on materials and articles containing any metallic element ing steel or iron. 40 Bar iron, square iron, rolled or hammered *** bars or shapes of rolled or hammered ir 41 "Pieces thereof except crop ends" added in act of 1930. 4 Muck bars: Crop ends, dutiable at 75 cents per ton under par. 301 of the act of 1922. 43 Muck bars. Paragraph, act of 1930 Schedule 3.-Metals and Manufactures of-Continued Classification 304 Steel ingots, cogged ingots, blooms and slabs, by whatever process made; die blocks or blanks; billets and bars, whether solid or hollow; shafting; pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; all descriptions and shapes of dry sand, loam, or iron molded steel castings; sheets and plates and steel, n. s. p. f.: 39, 44, 45 Valued not above 1 cent per pound. Valued at not above 11⁄2 cents per 310 cent per lb... pound. Valued above 1 cent, and not Valued above 212, and not above Valued above 11⁄2, and not above Valued above 5, and not above 8 Valued above 8, and not above 12 Valued above 12, and not above 16 "See par. 305 additional duties on materials and articles containing any metallic element used in alloy ing steel or iron. See par. 306 for definition of steel. 45 "Alloys n. s. p. f. used as substitutes for steel in the manufacture of tools" which appears in the acts of 1913 and 1922, was stricken from the act of 1930. 46 All the foregoing when made by the crucible, electric, or cementation process, either with or without alloys, and finished by rolling, hammering, or otherwise, and all steels by whatever process made, containing alloys such as nickel, cobalt, vanadium, chromium, tungsten, wolfram, molybdenum, titanium, iridium, uranium, tantalum, boron, and similar alloys. (Act of 1913.) 47 Steel bars, and tapered or beveled bars; mill shafting; pressed, sheared, or stamped shapes, not advanced in value or condition by any process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; all descriptions and shapes of dry sand, loam, or iron molded steel castings, sheets, and plates; all the foregoing, if made by the Bessemer, Siemens-Martin, open-hearth, or similar processes, not containing alloys, such as nickel, cobalt, vanadium, chromium, tungsten or wolfram, molybdenum, titanium, iridium, uranium, tantalum, boron, and similar alloys. (Act of 1913.) 48 Steel ingots, cogged ingots, blooms and slabs, die blocks or blanks, and billets, if made by the Bessemer, Siemens-Martin, open-hearth, or similar processes, not containing alloy, such as nickel, cobalt, vanadium, chromium, tungsten, or wolfiam, molybdenum, titanium, iridium, uranium, tantalum, boron and similar alloys. (Act of 1913.) "Crucible plate steel, cut or sheared to shape or otherwise, or unsheared. (Act of 1913.) 50 Concrete reinforcement bars" added in act of 1930. 61 Structural shapes. 62 "Provided, That on steel circular saw plates there shall be levied, collected, and paid an additional duty of one-fourth of 1 cent per pound" added in acts of 1922 and 1930. |